Owners manual

Pg 4I-JL1525BP
Part # HB-JLSBER (Included With JL25 Kits)
Item # Description Qty Item # Description Qty
HG5815-K HOURGLASS 5/8 BUSHING / BLK 4 716USSW 7/16 USS FLAT WASHER 4
141509 ES25 SLEEVE 4 12MMN 12 MM METRIC LOCK NUT 2
12X65BHB 12MM X 65MM BUTTON HD BLT 2
Front Installation:
1. With the vehicle on flat level ground, set the emergency brake, & block
the rear tires / wheels.
2. Raise the front of the vehicle, support the frame rails, & front differential
using jack stands.
3. Remove the front tires / wheels using a 22mm socket. (See Photo # 1)
4. Remove the OEM front skid plate using a 13mm socket / wrench. (See
Photo # 2)
5. Remove the OEM front sway bar end links using a 6mm hex key socket
/ wrench & 18mm socket / wrench. (See Photo # 3)
6. Disconnect the OEM front track bar from the frame using a 21mm socket
/ wrench. (See Photo # 4)
7. Disconnect the OEM drag link from the OEM pitman arm using a 21mm
socket / wrench. (See Photo # 5)
Photo # 1
Photo # 2
Photo # 3
Photo # 5
Photo # 4
Part # HB-JLSBE (Included With JL25 Kits)
Item # Description Qty Item # Description Qty
HG5815-K HOURGLASS 5/8 BUSHING / BLK 4 716USSW 7/16 USS FLAT WASHER 4
141509 ES25 SLEEVE 4 12MMN 12 MM METRIC LOCK NUT 2
12X70MMB 12MM X 70MM METRIC BOLT 2