Owners manual

Pg 2I-T4330STB
Component Box Breakdown:
Part #: FJ730STBB / FJ730STBH / FJ730STBM / FJ730STBN
T4330STBB / T4330STBH / T4330STBM / T4330STBN
Hardware Breakdown:
Part # TFDD2 (Included With T4330STB Boxes)
Item # Description Qty Item # Description Qty
TCLS10-B 1" DIFF LOWERING SPACER 2 12X612CTBG5 1/2 X 6 1/2 COARSE THRD BOLT 2
CS0750 CRUSH SLEEVE / .750" 4 12SAEW 1/2 SAE WASHER 4
8X40MMB 8MM X 40MM METRIC BOLT 4 12CTN 1/2 COARSE THREAD LOCK NUT 2
516USSW 5/16 USS WASHER 4 I-TFDD2 INST SHEET: TFDD2 1
Item # Description Qty Item # Description Qty
513STS TOYOTA 1"-3" ADJ FRT STRUT 2 B8598 BLK MAX SHOCK W/BLK BOOT 2
FJ25RS FJ REAR COIL SPRING 2 (Included With STBB Boxes)
(Included With FJ730STB Boxes) H7098 HYDRO SHOCK W/RED BOOT 2
T422RS 4RUNNER REAR COIL SPRING 2 (Included With STBH Boxes)
(Included With T4330STB Boxes) M9598 MONOTUBE SHOCK 2
TFDD2 TOYOTA DIFF DROP KIT 1 (Included With STBM Boxes)
(Included With T4330STB Boxes) N8098 NITRO SHOCK W/RED BOOT 2
SBE301-L SWAY BAR END LINK 2 (Included With STBN Boxes)
HB-SBE702 HARDWARE BAG: SBE702 1 I-T4330STB INST SHT: FJ730STB / T4330STB 1
Part # HB-SBE702
Item # Description Qty Item # Description Qty
141509 SLEEVE, 1.50" LONG 2 12X3FTB 1/2 X 3 FINE THREAD BOLT 2
HOURGLASS 5/8 5/8 SHOCK BUSHING 2 12FTN 1/2 FINE THREAD LOCK NUT 2
142120 STAB WASH PKG 2 12SAEW 1/2 SAE WASHER 4
STEM BUSH-SHK STEM BUSHING-SHOCK 4
Front Installation:
1. With the vehicle on flat level ground, set the emergency brake, &
block the rear tires / wheels.
2. Raise the front of the vehicle & support the vehicle securely using
jack stands.
3. Remove the front tires / wheels.
4. Remove the OEM ABS lines from the OEM upper A-arms &
disconnect the OEM ABS / brake lines from the OEM steering
knuckles. (See Photo # 1)
5. Disconnect the OEM sway bar end links from the OEM steering
knuckles. (See Photo # 2)
Photo # 1
Photo # 2