Owners manual
2005 - 2010 Ford Super Duty
Dual Steering Stabilizer
Part # 7154 & # 7156
PARTS LIST: 7154
ITEM# DESCRIPTION QTY
7000WS WHITE STEERING DAMPER 1
7154-UB STRG STABILIZE BKT,4"05F250 1
140629 EB6 STUD BAG - P932/140629 1
HOURGLASS 5/8 HOURGLASS 5/8 SHOCK BUSHING 2
SSB5468-T STRG STAB TAPERED SLV,05F25 1
58SP 5/8" SPACER - 1 1/4" O.D. 1
12X312FTB 1/2 X 3 1/2 FINE THREAD BLT 1
12SAEW 1/2 SAE WASHER 2
12FTN 1/2-20 FINE N/I LOCK NUT 1
81004 TAPERED SLEEVE, 1/2"I.D. 1
142121 ES24 SLEEVE, 1.38" LONG 1
PARTS LIST: 7156
ITEM# DESCRIPTION QTY
7000WS WHITE STEERING DAMPER 1
7156-UB STRG STABILIZE BKT,6"05F250 1
P837 STAB TAPERED STUD/141264 1
140629 EB6 STUD BAG - P932/140629 1
HOURGLASS 5/8 HOURGLASS 5/8 SHOCK BUSHING 2
12X114FTB 1/2 X 1 1/4 FINE THD BOLT 1
12FTN 1/2-20 FINE N/I LOCK NUT 1
12SAEW 1/2 SAE WASHER 2
SSB5468-T STRG STAB TAPERED SLV,05F25 1
Installation:
1. Park the vehicle on flat level ground & set the emergency brake.
2. Turn the tires / wheels to a straight forward position.
3. Remove the OEM steering stabilizer & OEM bracket from the
cross member using a 18mm socket. (See Photo # 1)
4. Attach the new Skyjacker steering stabilizer bracket to the cross
member in the OEM mounting holes using the OEM hardware.
Note: Install the bolts from the front. Torque to 90 Ft. Lbs.
5. Part# 7156 only: Install the 1/2 x 1 1/4” fine thread bolt, washers,
& nut in the third mounting hole. Torque to 90 Ft. Lbs. (See Arrow
in Photo # 2)
6. Install the new tapered sleeve into the OEM tapered mounting
hole on the drag link. With the tapered sleeve installed, insert the
new tapered stud (7156 only). (See Photo # 3) Insert the bolt &
spacer for the 7154. Spacer is installed on the top side of drag link
(7154).
7. Install the new non-tapered stud into the top of the new steering
stabilizer bracket. Install the 5/8 hourglass bushings & boot onto
the new steering stabilizer. Install the new steering stabilizer on
the new studs & tighten all nuts. (See Photo # 4)
Note: Part# 7154 is designed to work on vehicles with 4” & 8.5" Suspension Lifts. When
installing on an 8.5”, the steering stabilizer & stud will mount to the bottom of the new
frame bracket. Part# 7156 is designed to work on vehicles with 6” Suspension Lift.
Seat Belts Save Lives, Please Wear Your Seat Belt.
I-7154-7156 REV1 3-11 Pg 1
Photo # 1
Photo # 2
Photo # 3
Photo # 4
www.skyjacker.com