Manual

ManualsBrandsSkyjacker ManualsCar9100

Single Steering Stabilizer

Part # 7100 / 9100

I-7100 REV2 1-14 Pg 1

www.skyjacker.com

REQUIRED TOOL LIST:

• Safety Glasses

• Metric / Standard Wrenches & Sockets

• Tape Measure

• Torque Wrench

Before beginning the installation, thoroughly & completely read these instructions & the enclosed

driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view

of all occupants. Please refer to the Parts List to insure that all parts & hardware are received prior

to the disassembly of the vehicle. If any parts are found to be missing, contact SKYJACKER

Customer Service at 318-388-0816 to obtain the needed items. If you have any questions or

reservations about the installation of this product, contact SKYJACKER

Technical Assistance at

318-388-0816.

Component Box Breakdown:

Part #: 7100 / 9100

Item # Description Qty Item # Description Qty

7900WS WHITE STEERING DAMPER 1 BTIE-K BLACK BOOT TIE 1

(Included With 7100) (Included With 9100)

9900WS SILVER STEERING DAMPER 1 HSS HYDRO SHOCK DECAL 1

(Included With 9100) (Included With 7100)

B10RS RED BOOT 1 SSD SILVER STABILIZER DECAL 1

(Included With 7100) (Included With 9100)

B10KS BLACK BOOT 1 HB-7100 HARDWARE BAG: 7100 / 9100 1

(Included With 9100) I-7100 INST SHEET: 7100 / 9100 1

BTIE RED BOOT TIE 1

(Included With 7100)

Hardware Bag Breakdown:

Part # HB-7100

Item # Description Qty Item # Description Qty

83149 MAIN BRACKET 1 38SAEW 3/8 SAE WASHER 2

83161 TIE ROD BRACKET 1 516CTN 5/16 COARSE LOCK NUT 4

38X234X312U 3/8 X 2 3/4 X 3 1/2 U-BOLT 1 516SAEW 5/16 SAE WASHER 4

516X1X134U 5/16 X 1 X 1 3/4 U-BOLT 2 STEM BUSH-SST STEM BUSHING 4

38CTN 3/8 COARSE LOCK NUT 2 142120 STAB WASH PKG 2

Summary of content (4 pages)

PAGE 1
Single Steering Stabilizer Part # 7100 / 9100 www.skyjacker.com Required Tool List: • • • • Safety Glasses Metric / Standard Wrenches & Sockets Tape Measure Torque Wrench Before beginning the installation, thoroughly & completely read these instructions & the enclosed driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view of all occupants. Please refer to the Parts List to insure that all parts & hardware are received prior to the disassembly of the vehicle.
PAGE 2
Installation: 1. Park the vehicle on a level concrete or asphalt surface with the front tires / wheels pointing straight forward. 2. Set the emergency brake & block the rear tires / wheels. 3. Place the new Skyjacker main bracket “A” against the front of the axle on the driver’s side & install the supplied large u-bolt around the axle to the new main bracket. (See Photo # 1) 4. Install the body end of the new Skyjacker steering stabilizer to the new main bracket using the supplied bushings & washer pack.
PAGE 3
Final Notes: • After the installation is complete, double check that all nuts & bolts are tight. Refer to the following chart for the proper torque specifications. (Do not retighten the nuts & bolts where thread lock compound was used.) • Cycle the steering of the vehicle left to right & check all parts for adequate clearance. • After the first 100 miles, check all of the hardware for the proper torque & periodically thereafter.
PAGE 4
Jesus Forgives, Rocks Don’t www.skyjacker.com Jesus Christ Died For You. Jesús murió por ti. For God so loved the world that He gave His only Son, so that everyone who believes in Him should not perish, but have everlasting life. Romans 3:23 “Porque tanto amó Dios al mundo, que dio a su Hijo unigénito, para que todo el que cree en él no se pierda, sino que tenga vida eterna.” Romanos 3:23 For all have sinned; all fall short of God’s glorious standard.