Owners manual

ManualsBrandsSKYJACKER ManualsAutomotiveSkyjacker 7122 Steering Stabilizer Single Kit

1988 - 1998 IFS GM

1/2 & 3/4 Ton 4WD

0" - 2.5” Lift

Single Steering Stabilizer

Part # 7122 / 9122

I-7122 REV2 8-12

Pg 1

www.skyjacker.com

REQUIRED TOOL LIST:

• Safety Glasses

• Metric / Standard Wrenches & Sockets

• Measuring Tape

• Torque Wrench

Before beginning the installation, thoroughly & completely read these instructions & the enclosed

driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view

of all occupants. Please refer to the Parts List to insure that all parts & hardware are received prior

to the disassembly of the vehicle. If any parts are found to be missing, contact SKYJACKER

Customer Service at 318-388-0816 to obtain the needed items. If you have any questions or

reservations about the installation of this product, contact SKYJACKER

Technical Assistance at

318-388-0816.

Component Box Breakdown:

Part #: 7122 / 9122

Item # Description Qty Item # Description Qty

7800WS WHITE STEERING DAMPER 1 BTIE-K BLACK BOOT TIE 1

(Included With 7122) (Included With 9122)

9800WS SILVER STEERING DAMPER 1 HSS HYDRO SHOCK DECAL 1

(Included With 9122) (Included With 7122)

83016 MAIN BRACKET 1 SSD SILVER STABILIZER DECAL 1

B10RS RED BOOT 1 (Included With 9122)

(Included With 7122) HB-7122 HARDWARE BAG: 7122 / 9122 1

B10KS BLACK BOOT 1 I-7122 INST SHEET: 7122 / 9122 1

(Included With 9122)

BTIE RED BOOT TIE 1

(Included With 7122)

Hardware Bag Breakdown:

Part # HB-7122

Item # Description Qty Item # Description Qty

83037 TIE ROD BRACKET 1 516CTN 5/16 COARSE THREAD NUT 4

916X112FTB 9/16 X 1 1/2 FINE THREAD BOLT 1 12USSW 1/2 USS WASHER 1

516X114FTB 5/16 X 1 1/4 FINE THREAD BOLT 1 516SAEW 5/16 SAE WASHER 5

516X114X134U 5/16 X 1 1/4 X 1 3/4 U-BOLT RD 2 STEM BUSH-SST STEM BUSHING 4

916FTN 9/16 FINE THREAD NUT 1 142120 STAB WASHER PKG 2

516FTN 5/16 FINE THREAD NUT 1

Summary of content (4 pages)

PAGE 1
988 - 1998 IFS GM 1/2 & 3/4 Ton 4WD 0" - 2.5” Lift Single Steering Stabilizer Part # 7122 / 9122 www.skyjacker.com Required Tool List: • • • • Safety Glasses Metric / Standard Wrenches & Sockets Measuring Tape Torque Wrench Before beginning the installation, thoroughly & completely read these instructions & the enclosed driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view of all occupants.
PAGE 2
Installation: 1. Park the vehicle on a level concrete or asphalt surface with the front tires / wheels pointing straight forward. 2. Set the emergency brake & block the rear tires / wheels. 3. Models With OEM Lower Skid Plate: Remove the OEM lower skid plate mounted between the OEM cross member & front differential. Photo # 1 Retaining Nut 4.
PAGE 3
Final Notes: • After the installation is complete, double check that all nuts & bolts are tight. Refer to the following chart below for the proper torque specifications. (Do not retighten the nuts & bolts where thread lock compound was used.) • Cycle the steering of the vehicle left to right & check all parts for adequate clearance. • After the first 100 miles, check all of the hardware for the proper torque.
PAGE 4
Jesus Forgives, Rocks Don’t www.skyjacker.com Jesus Christ Died For You. Jesús murió por ti. John 3:16 Juan 3:16 For God so loved the world that He gave His only Son, so that everyone who believes in Him should not perish, but have everlasting life. Romans 3:23 “Porque tanto amó Dios al mundo, que dio a su Hijo unigénito, para que todo el que cree en él no se pierda, sino que tenga vida eterna.” Romanos 3:23 For all have sinned; all fall short of God’s glorious standard.