User's Manual

18
To assign the SmartTag to a specific club:
1. Make sure you are still on the “Clubs” screen
in the SkyCaddie Mobile app.
2. Your SkyCaddie LINX GT will automatically
switch to LEARNING mode and display “TAP
TAG TO LEARN” on the screen.
3. To learn a SmartTag, hold the SmartTag to the
Read Area until the SkyCaddie LINX GT
vibrates.
4. After reading the SmartTag, a list of clubs will
pop up in the SkyCaddie Mobile app.
5. Select the club that’s attached to the
SmartTag. The club screen will now show a
green dot by the club’s name, indicating that
your club has been learned.
6. Repeat steps 3-5 for any remaining
SmartTags.
It should only take a few minutes to learn all of
your SmartTags. You will NOT need to repeat
this process, unless you move a SmartTag to a
different club or if you replace it.
TIP: If a SkyGolf Divot Tool with SmartTag was included in
your package, you can learn it to any club by simply touching
the glossy side of the Divot Tool to the Tag/Read Area of your
LINX GT.”
TAG READ AREA