User's Manual

8
At the place where your ball landed:
1. Press the MARK BALL button to open
the MARK view.
2. The MARK view will display the distance
from your last mark.
3. If you want to mark again, press the OK
button again.
4. Press MARK BALL again to return to
the previous golf view.
The MARK BALL feature only works when you are
in GOLF mode.
While on the MARK view, if no button is pressed
for 20 seconds your SW2 will automatically return
to the GREEN view.
5.0 SETTING THE TIME AND DATE
5.1 To set the time and date manually
1. Press and hold the MENU button until the menu appears.
2. Highlight SETTINGS and press the OK button.
3. Highlight TIME and press the OK button.
4. Set MODE to MANUAL using the UP/DOWN buttons.
5. Press the OK button to confirm.
6. Select MM-DD or DD-MM and press OK.
MARK
BALL
OK
YARDS
FROM
MARK
OK
MARK
BALL
DAY
TIME
DATE
SECONDS
AM/PM
SET THE
HOUR