LX2 Smart Watch User Manual Before using please check instruction V0.
1.Considerations for use Notice 1.1 Company reserves the right to modify the contents of this manual without any notice. It is normal for some functions to differ in a particular software version. 1.2 Please charge the product for more than 2 hours before using 1.3 Do not press the button or slide the screen in the water. 1.4 This product supports IP68 waterproof, which is not suitable for diving, soaking hot water, brewing tea and other corrosive liquids.
2. Product Introduction Basic operation 2.1 First use, system need to set features, please be patient 2.1.1 Setting Language: set the language you need. 2.1.2 Setting body features, weight, height, Daily exercise goals, etc 2.1.3 Select the your mobiles 2.1.4 Scan the QR code, download and install the sync app according to the tips on your watch.
2.2.3 Super power saving: when this option is selected, the super power saving button changes from gray to green, indicating that the system will enter the super power saving mode. The super power saving mode only displays time and power, while other functions are in a deep sleep. The screen cannot slide into function selection.Click the "X" button in the power-saving mode interface to resume normal use. 2.2.
3. Notice 3.1 Please charge it fully before use, it will take 1-2 hours to charge 3.2 Charging cable can use the charging head of android smartphone, and use the special magnetic absorption charging cable configured;During charging, keep magnetic absorption normal; 3.3 BT disconnects over the distance during use. After two-way anti-loss is enabled, it cannot use the search function before reconnection. 3.
4.1 Can not switch on Press and hold the Power button more than 3 seconds charge the smart watch 4.2 Automatically switch off. Low power, please charge 4.3、Watch lasts only a short time The battery is not fully charged, please make sure that there is sufficient charging time (the minimum charge time is 2 hours). The function of raising the hand and brightening the screen is on, which consumes more power 4.4 Watch can’t charge Check the charger, or change another charger.
FCC/ISEDC Compliance Notice This device complies with Part 15 of the FCC Rules and ISEDC Licence‐exempt RSS standard. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received,including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
RF Exposure Information SAR tests are conducted using standard operating positions accepted by the FCC/ISEDC with the device transmitting at its highest certified power level in all tested frequency bands,although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value.
