User's Guide

2. Insert the included power adapter into a wall socket and plug one end of the included
USB-C cable into the adapter.
[INSERT DIAGRAM OF WALL PLUG AND USB CABLE]
3. Attach the Skydio 2 battery to your Skydio 2 and plug the other end of the USB-C cable
into the USB-C port on the back of the drone. Note that Skydio batteries are held in
place magnetically and may be removed by pulling on them.
4. The LEDs on the Skydio 2 battery will indicate the current state of charge. You may also
tap the button on the front of the battery to display the current state of charge. The LEDs
will pulse while the battery is charging. While charging, the Skydio 2 should be in an
open area as it is normal for the chassis to become warm to the touch. When fully
charged the LEDs on the battery will remain solid for one minute then turn off.
CHARGING FULLY CHARGED
Will display solid then turn OFF
Connecting to Skydio 2
While your battery is charging, download and install the Skydio 2 app on your mobile device.
The Skydio 2 app is available on the App Store® and Google Play™.