Instruction Manual

Bright -
3 Scene
4 Zone
Bright+
On/Off
Color wheel
2
User Manual Ver 1.1.3
Key function
● R7 4 zone CCT remote
On/Off: Short press turn on/off all zone light.
1,2,3,4 zone: Short press select and turn on zone light, long press 2s turn off zone light.
Short press multiple zone key fastly, will synchronous select multiple zone synchronously.
Color wheel: Touch to change current zone color temperature.
Bright+/-: Adjust brightness for current selected zone,
short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
3 Scene: Short press recall the scene, long press 2s save the current color into the scene.
the LED indicator will light up longer when save OK.
4 zone recall or save synchronously.
● R7-1 1 zone CCT remote
Bright -
3 Scene
2 Bright
Bright+
On/Off
Color wheel
2 color temperature
On/Off: Turn on/off light.
Color wheel: Touch to change color temperature.
Bright+/-: Adjust brightness, short press 10 levels, long press 1-6s for continuous
256 levels adjustment.
100%,50%: Get 100% or 50% brightness directly.
WW: Get warm white directly.
CW: Get cool white directly.
3 Scene: Short press recall the scene, long press 2s save the current color into the scene.
the LED indicator will light up longer when save OK.
Safety information
1 Read all instructions carefully before you begin this installation. .
2 When installing battery, pay attention to the battery positive and negative polarity. .
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4 Gently handle remote, beware of falling..
5. For indoor and dry location use only.