Instruction Manual

● R11 1 zone dimming remote
● R12 1 zone CCT remote
WW 50%
CW 50%
WW 100%
CW 0%
WW 0%
CW 100%
Short press to turn on or turn off light.
Long press 1-6s to adjust brightness.
Color touch slide
On/Off
LED indicator
Key function
Bright touch slide
On/Off
LED indicator
1%
100%
50%
R 100%
G 100%
B 100%
Color touch slide
● R13 1 zone RGB remote
Short press to turn on or turn off light.
Long press 1-6s to adjust brightness.
Fast press 2 times to get white color (RGB mixed).
On/Off
LED indicator
2
User Manual Ver 1.1.2
R 100%
G 100%
B 100%
Color touch slide
W 50%
W 100%
1%
1. Short press for On/Off.
2. Press and hold 1-6s for RGB brightness dimming.
3. Fast press 2 times for shift between RGB, W and
RGB+W mode.
In RGB or RGB+W mode, touch slide to change
RGB color.
In W mode, touch slide to change white brightness.
LED indicator
● R10 1 zone RGB+CCT
Safety information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
R 100%
G 100%
B 100%
Color touch slide
WW 50%
CW 50%
WW 100%
CW 0%
WW 0%
CW 100%
1. Short press for On/Off.
2. Press and hold 1-6s for brightness dimming.
3. When light is on, fast press 2 times for shift between RGB and CCT touch slide.
LED indicator
● R14 1 zone RGBW remote