Instruction Manual

Technical Parameters
Input and Output
Operation temperature
Environment
Ta: -30
O
C ~ +55
O
C
Safety and EMC
EMC standard (EMC)
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED)
ETSI EN 300 328 V2.2.2
Certication
CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
Warranty
5 years
Warranty
1
User Manual Ver 1.1.2
● Apply to single color, dual color ,RGB, RGB+W or RGB+CCT LED controller.
● Ultra sensitive color adjustment touch slide.
● Each remote can match one or more receiver.
● CR2032 battery powered.
● Operate with LED indicator light.
● Magnet on the back which can be easily stuck on back holder or any metal
surfaces.
● White & Black available
Features
Touch color slide/1-5 color /Wireless remote 30m distance/CR2032 battery/Magnet stuck fix
Ultrathin Touch Slide RF Remote Controller
Model No.: R11, R12, R13, R14, R10
R11
R12 R13
Dimming
CCT RGB
R10
RGB+CCT
R14
RGBW
LVD RED
Output signal (2.4 z)RF GH
Working voltage 3 2032)VDC(CR
Working current <5mA
Standby current <10μA
Standby time 1 year
Remote distance 30m(Barrier-free space)
Package
L156 x W48 x H22mm
Gross weight
Size
0.075kg
Mechanical Structures and Installations
36.00 mm
139.00 mm
11. 00 mm
53.50 mm
Note: Before the first use,
please remove the protective
film on the battery.
C 2032 BatteryR
Back holder with magnet
To fix the remote, three options are offered for selection:
Option 1: stuck the remote on any metal surfaces directly.
Option 2: fix the remote' back holder on the wall with two screws.
Option 3: adhere the remote' back holder to the wall with paster.
Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press on/off key on the remote.
The LED indicator fast flash a few times means match is successful.
Use Power Restart
Match:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times means all matched remotes
were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection: