Instruction Manual

1
User Manual Ver 1.0.0
Features
Model No.: DT-B
DALI AC Triac Dimmer
1DALI address / 1 Channel output / Trailing edge
● AC phase-cut mosfet DALI dimmer, one DALI address, one channel output.
● Trailing edge dimmer.
● The minimum brightness is adjustable.
● In accordance with DALI standard protocol 101, 102, 205 (IEC 62386) and in compliance
with DALI products from other international incorporation.
● DALI address can be automatically assigned by DALI master.
● To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights.
● Over-heat protection, Overload protection, recover automatically.
Technical Parameters
Input and Output
Operation temperature
Environment
Ta: -30
O
C ~ +55
O
C
Case temperature (Max.)
IP rating
IP20
Ta: +70
O
C
Warranty
5 years
Warranty
Output current
Input voltage
Output voltage
Gross weight
Size
Package
L75x W75 x H40mm
0.981kg
Max 1.5A
100-240VAC
100-240VAC
Output power
150-360W
Mechanical Structures and Installations
AC L input
AC N input
AC N output
AC L output
One groups of DALI signal input
DALI bus no need distinguish
plus-minus polarity
Set button (on the side)
LED indicator
Set button
52.00 mm
52.00 mm
26.00 mm
165.00 mm
165.00 mm
Brown
Blue
Brown
Blue
Red
Black
Compatible Load Types
Load Type
Maximum Load
Remarks
Due to variety of LED lamp designs, maximum number of LED lamps
is further dependent on power factor result when connected to dimmer.
Maximum permitted number of drivers is 200W divided by driver nameplate
power rating, and make sure the surge current is no more than 2 times 65A.
Dimmable LED lamps
Triac Dimmable
LED drivers
Incandescent lighting,
HV Halogen lamps
200W @ 220V
100W @ 110V
400W @ 220V
200W @ 110V
200W @ 220V
100W @ 110V