Product Info

74
◊ Go to the Vinyl Spooler window and select the Calibration tab.
◊ Click on the Cutter Scale icon:
◊ A new window opens where you can enter the dimensions of a square or rectangle to draw with the test
pen. It is highly recommended that the dimensions be at least 200 mm. Note that in the current version
of SignMaster, the display in this window is always in inches. However, you can enter values in mm by
typing in “mm” after the number as shown:
◊ Press the tab key and the 200 mm will be automatically converted into inches. Repeat with Length:
1. Select the
Calibration
tab
2. Click on the Cutter Scale icon
Type in 200 mm
exactly as shown
Width has been
converted to in
Click here to start
the drawing
Type in 200 mm
exactly as shown