Product Info

70
◊ The settings below the option are activated when choosing either to end or to left. You can enter a
specific distance for the blade holder to advance. This is useful when cutting repeats of the same
project because it allows for the origin to be set automatically for the next repeated cut.
2.06.2 Mirror
• Checking the Mirror option will apply a horizontal mirror to the shape (s) before cutting. This is useful in
applications such as:
◊ Cutting HTV in which the material is placed faced down so that the heat protection layer is not
penetrated by the blade
◊ Cutting vinyl to be applied to the inside of a car or home window but primarily viewed from outside of the
window
◊ When cutting certain non-homogenous paper materials in which cutting upside down yields cleaner
results
2.06.3 Weeding Options
• For those cutting vinyl and HTV, the weeding options in SignMaster are worth noting.
◊ Auto Weed-Box: Marking this option places a single weed box around the entire project:
o Note: to change the size/offset of the weed box around the design, click on the Settings tab and
adjust, as desired:
Before applying Mirror
After applying Mirror
Before applying Auto Weed-Box
After applying Auto Weed-Box – blue
border around design indicates weed cut