Product Info

62
• Click on OK and then select which blade type you are using for this new preset Enter the new Blade Offset
and Overcut values. Then click Update:
• Click on Apply to close the Blade Settings Library. The new preset will now be available for selection in
the Description menu.
• If you need to delete a preset, select it from the Description menu and click on the “-“ icon to the right.
2.04.2 Saving a Preset for a Material
• IMPORTANT: As was noted in Section 2.02.4, Up Speed (aka Travel Speed) is not functional in
SignMaster. Thus, if you need a separate Cut Speed and Up Speed for a particular material’s preset, it is
recommended that the preset be made on the control panel.
• Similar to the blade holder preset, you can enter settings for a particular material. For example, let’s say you
cut Georgia Pacific 110 lb cardstock at a Force of 55 and a Speed of 8. Use the following steps to create a
new preset in SignMaster:
• Go to the Vinyl Spooler>Cut Options window and click on Edit Presets:
3. Click on Update
2. Enter new Blade Offset
and
Overcut values
1. Select type of blade
4. Click on Apply
Enter a new name
Click on +
Click on Edit Presets