Product Info

55
• Selecting one of the options, such as 45 degree blade will display an image of the blade, the Blade Offset
and Overcut assigned as a Preset:
• Sections 2.03.3 and 2.03.4 will explain Blade Offset and Overcut settings. Section 2.04 will explain how to
modify these settings, if needed and save as a Preset.
2.02.4 Determining the Cut Settings
• There are three locations where Cut Settings can be entered:
◊ Send to be Cut>Cutter Control tab (which was covered in Section 1.13)
◊ Send to be Cut>General tab
◊ Vinyl Spooler>Cut Options tab
• Send to be Cut>General
◊ Use this location when you need to assign different settings to different layers of your project. For
example, let’s say you wanted to use the embossing tool to score lines in a popup card, followed by
cutting out the card itself. Or, another example would be using the test pen to draw a design and then
cutting a contour around it. Under General Options, Assign Tools by Color is marked and then, below
that in the Cutting Tool Presets section, individual colors can be highlighted and cut settings assigned
by selecting a Preset or by clicking on Edit:
Click here
Tool menu
Color of cap on a
Skycut 45 degree
blade
Presets for Blade Offset and Overcut