Product Info

1.14.1 Advanced Settings

• The optional settings in the Advanced Settings screen are:

• Array: Tap the Array button to open the Array screen:

◊ In the above screenshot, the shape sent to the Skycut would cut 3 across and 7 up & down, for a total of

21 shapes. The spacing between each shape would be 0.20 inches (Note: to use mm instead of inches,

switch the Units setting. Refer to Section 1.14.2).

• Show Point: When toggled on, the Main Screen displays movement and location output based on the

position of the cutting head:

Display (X,Y) location of cutting

head

Option to use laser engraver

Set up rows & columns of repeats

Turn on if you want cutting head

to move to the far right when

cutter is powered on

Separate Cut Speed from Up

Speed

Option to change directions on

up/down keys

Sizing Calibration

Refer to

Section 2.08

Tap here to turn on Array

Spacing between left-to-right repeats

Number of repeats: left to right

Number of repeats: up & down

Spacing between up-&-down repeats

Repeats for a print and cut application

Refer to Section 3.08