Product Info

38
• If you want the arrow to draw where you have it located on the Drawing Area, versus at the origin, then you
need to mark the option called Absolute (position) in the same Send to be Cut window:
• Set the origin in the lower right corner of the mat’s grid and then place the paper in the correct location on
the mat to correspond to where the shape is positioned in SignMaster. Refer to Section 2.02.2 for more
details on controlling where images will cut.
1.14 Default Settings To Consider
• The Skycut’s control panel offers a number of default settings. Some of these may not be important at this
point in the learning process. So, you may want to skip this section for now but remember that it’s here and
could provide you some options to improve your experience with the Skycut.
• Each of the following sections will refer to one of the settings in the Set screen.
IMPORTANT: Please read Section 2.01 before cutting!
Check Absolute (position)
Arrow will now draw in
this location
Location of arrow in
Drawing Area
Test pen is still positioned in lower right
corner of material before drawing