Product Info

35
• Click on the small icon to left of Passes and the Blade Settings Library opens:
• To switch to the test pen, click the down arrow to the right of Description and select Pen Tool:
• Click on Apply and the Cutter Settings (Tool settings) will update showing a 0.00 setting for Blade Offset
(more about this setting is covered in Section 2.03.3):
• Next, the preset for drawing with the test pen will be selected. Click on the down arrow to the right of Preset
Condition. In the drop-down menu, select Pen Mode (Tool 0)(Head L). Note that on a dual head cutter,
there are two options, but on a single head cutter, you will always select Tool 0:
Select Pen Tool
A test pen image appears
Pen Tool now
appears here
Pen Tool should now appear here
Blade Offset should now read 0.00
Click down arrow