Product Info

34
• If you wish to resize the arrow, either drag one of the square handles around the selected arrow or, in the
settings above the Drawing Area, change the Width or Height, as desired:
• At this point, if you plan to export this file to a USB flash drive, rather than cut directly to the Skycut from
SignMaster, please go to Section 1.12.4 for instructions.
• After making any changes to the design, click on the Cut, Plot & Engrave Tools icon and select
Send to Cutter. The following window opens. More about the settings on the left side of the window will be
covered in Section 2.03. For now, just note where the shape will cut relative to the material:
• Before executing the cut/draw process, appropriate settings need to be selected. Click on the Cutter
Control tab and the following settings will be displayed:
Width and Height
Note where design
will cut relative to
where the blade
holder is positioned
Test pen is positioned in
the lower right corner of
the material before
drawing
Open Blade Settings Library
Tool settings
Cut settings
Click on the Cutter Control tab