Product Info

• For initial testing of your Skycut, it is highly recommended that the test pen be used until you know, with

certainty, where shapes will draw.

• After you have entered the settings you plan to use, click on Done and the Vinyl Spooler window will close.

• Again, click on the Cut, Plot & Engrave Tools icon (6

from the left on the upper middle task bar)

and, this time, select Send to Cutter.

• The following window opens. More about the settings on the left side of the window will be covered in

Section 2.03. For now, just note where your shape will cut relative to the material and how to initiate the

exporting of the PLT file:

Change your

settings to the

ones shown

here

Select Pen Tool

for initial testing

Pen drawing:

leave unchecked;

Cutting: Check

and enter settings

Click on Done