Product Info

23
(8) If instead of receiving a Connected OK display, you see Password err, again verify the network you
selected and the password you entered. If you are unable to successfully connect and the Skycut is
within a few feet of your router, please check your router’s user manual and/or search online for issues
with your particular router model.
(9) If you wish to reset and start again, press and hold the Default button for 3 seconds until the button
turns red. Then click on Scan and repeat from Step 3.
(10) Once you receive the Connected OK display, in SignMaster, click on the Cut, Plot & Engrave Tools
icon (6
th
from the left on the upper middle task bar) and select Vinyl Spooler. In the window
which opens, click on the Connection tab and make the following changes:
• Click on Configure and the following window opens:
Success!
Click on Apply
Click on Apply
Wait will be displayed for
several minutes
Should read
SKYCUT C16 (or the
model you have
purchased)
Select Windows
Port
Click on
Configure
Select Port
Select TCP