Product Info

1.11 Registering and Installing SignMaster

1.11.1 Installing from a Download

• Once you have purchased a registration for SignMaster, the software can be downloaded from the following

link. It’s important to use this link so that the Skycut will be installed as the cutter of choice. You will need

your Product Serial Number that was sent to you. Since you’ll also need this number every time you

update the software, keep this number in a safe place.

https://signmaster.software/smc.htm

• Note where the file will be saved on your computer so that you can later browse to that folder and launch

the .exe file which has been downloaded. Follow the steps in the following Section 1.11.2, starting with

Step (4).

1.11.2 Installing from a CD

(1) Remove the CD from the case and insert into the CD ROM drive on your computer.

(2) The downloaded file is in.exe format, thus ready to launch.

(3) If Windows Autorun does not initiate a welcome screen, use Explorer to locate and click on the DVD drive

letter for your computer. Double click on the Welcome file and the following window will open:

(4) Click on Install Software and wait for the installation program to open. Select the language you prefer:

Set up wireless connection to home

or office network:

Section 1.12.2

Version numbers, software

selection, reset:

Section 1.14.3

Calibrate and use camera for print

and cut applications:

Chapter 3

Array setup, SignMastere, and options

for display and cutter behavior:

Section 1.14.2

Set end-of-cut options: Section

2.06

Settings for: LED, Units,

Language, Screensaver, Alarm:

Section 1.14.2

Click on Install Software