Product Drawings

120
• Because Absolute (position) will be needed to make sure the score lines and the cut lines end up aligned
properly, you may want to move your project to the lower right corner of the Drawing Area, close to the
origin you’ll use on the material:
• Click on the thumbnail for the score lines since that layer should always be executed first. In the Send to be
Cut window, check Absolute (position) and verify that Assign Tools by Color is not marked:
• Click on the Cutter Control tab and enter appropriate settings for scoring your material. In this case,
cardstock is being scored:
Cut lines are on one layer
Score lines are on another layer
Check the box for Absolute
(position)
Uncheck the box for Assign Tools
by Color
Uncheck Blade
Offset
Enter settings for scoring
Set Passes for scoring