Product Drawings

114
• In the USB window, you may wish to mark the option for Search Root Dir in case the Skycut has already
been used to open files in a subfolder on the flash drive:
• Click on QR Cut and the camera will
(1) Read the first registration mark.
(2) Move to the QR code to read the timestamp.
(3) Locate the file on the flash drive with that same timestamp as its name.
(4) Proceed with identifying the rest of the marks and perform the contour cut.
• As mentioned in Section 3.10.2, if you wish to return to regular contour cutting in SignMaster (i.e. not have
the camera stop and look for a QR code), remember to deactivate QR Cut on the Skycut’s control panel
using the same procedure presented in Appendix B.
Mark this option
Click on QR Cut