Product Drawings

112
◊ Printing the QR code at both the top and the bottom of the printout means you can position the printout
either way in the cutter:
o Even though the following Preview (when using the (x2) option) indicates the printout needs to
be positioned in this orientation, you can have it rotated 180 degrees and it will still cut correctly
because the QR code contains a symbol indicating which orientation is being used:
◊ You have the option at this point of proceeding with the normal process of printing and cutting from
SignMaster. If everything is working correctly, after the first lower right registration mark is identified, the
camera will stop at and scan the QR code before proceeding with the cut.
◊ Alternatively, you can print now but perform the contour cut at any point in the future from this same
computer by having the cut file created and stored in the Vinyl Spooler. To do this, after printing (or
exporting as a PLT file), click on Done and the following window opens:
(x2) enabled: the QR code
is also printed here
(x2) disabled: QR code
is only printed at the top
versus
(x2) enabled: two QR codes and the printout
can be inserted this way or rotated around
(x2) disabled: only one QR code and the
printout must be inserted this way
versus
Click on Yes to have cut file
added to the spooler
Click Done
(instead of Cut)