Product Drawings

109
◊ Once you have entered the
Δx and Δy values you wish to use, press the Go on button and the cutting
will resume.
• Important:
◊ If you need to make yet another adjustment, repeat the process. The new Δx and Δy you enter is only
an adjustment based on what you are now needing. For example, based on this example, if you need Y
to move another 0.2 mm in the same direction, you would enter 0.2, not 0.4 mm.
◊ Remember that the adjustment is reset at the conclusion of the cut.
3.10 Using a QR Code in Contour Cutting
• SignMaster has the ability to add a QR code to a printout, which identifies a timestamp assigned by
SignMaster. This QR code can be used when sending the cut directly from SignMaster or when using a PLT
file from SignMaster with the QR Code option enabled.
• To activate QR code usage on the Skycut, go to Appendix B and use the command procedure for adding
the QR Cut button to the USB screen:
Adjustments to be
made to cut line
Click the arrow buttons to move the
cut line in the direction needed.
Cmd code 041 will add QR
Cut to the USB screen
(Appendix B)