Product Drawings

108

• To select a specific range of images, note the following:

◊ The first set to cut is referred to as M0 and then subsequent sets are M1, M3, M3, etc.

◊ In the Mark Set window, select Custom and then enter the start and ending sets. For example, if you

want to start with the second set and end with the seventh, you would change to M2 and M7:

◊ The resulting sets will be sent versus the entire project:

• To tweak the calibration after a cut has begun:

◊ Press the Pause button on the Home screen to immediately stop the cutting.

◊ Press the USB button on the Home screen.

◊ Press the Mark Set button.

◊ Check or uncheck the adjust Immediately option based on the following:

o Check the option if you want the adjustment to be made on the current shape that was being cut

when you paused the Skycut. Note that the start and end point on that path will not completely

close, as a result.

o Do not check the option if you want the adjustment to be applied on the next shape that will be cut.

◊ Click on the arrow buttons to adjust the Δx and Δy by the amount and in the direction you need the cut

line to move:

Select Custom

Default settings

Select + and –

buttons to

change

start and ending sets

With M2 and M7

entered, these sets will

be cut