Product Drawings

102
• You can see the movement of the marks towards the image as the Mark Position is decreased. Because of
the shape of the ox, this shouldn’t be an issue with the location of the registration marks relative to the
printed image. However, if a design is more rectangular, such as a wine bottle label, then it is much easier
to see that it could cause issues if the Mark Position is too small:
3.09 PNC from USB Flash Drive
3.09.1 PNC from Flash Drive – Single Cut
• To perform a print and cut project from the control panel, first perform Steps (1) – (11) from Section 3.04.2.
However, before clicking on Done to close the Vinyl Spooler window, click on the Connection tab and
change the Port to U-Disk from the drop-down menu. Then click on Done:
Mark Position = 0.307 in
Should work
Mark Position = 0.307 in
Mark Position = 0.057 in
Mark Position = 0.557 in
Will work
Mark Position = 0.057 in
Will not work
Mark Position = 0.557 in