User Manual

External Battery
1. ConnecttheCharging Stationtoapoweroutlet(100-120Vac,50-60Hz/220-240Vac,50-60Hz).
2. PressthePowerButtononcetoturnontheCharging Station.
3. InsertthebatteriesintotheBatteryPortstostartcharging.TheCharging Stationwillchargethe
battery withthehighestremainingbatterypowerfirst.
Power Outlet
2
1
3
Mounting the RC Battery
1
 Pressandholdthebatteryreleasebutton.
2
 Insert the Batteryintothebatterycompartment.Make sure the bottomofthebatteryis
alignedtothemarkinglineinthecompartment.
3
 Pushthebatterytothebottom.
ToremovetheBattery,pressandholdthebatteryreleasebutton,thenpushthebattery
upward.
Mounting the 4G Dongle and SIM Card
 Onlyuseaapproveddongle.
 The dongle andSIMcardenabletheSecure Controllertoaccess4Gnetwork.Makesure
todeploythesecorrectly,otherwise,networkaccesswillnotbeavailable.
 ThedongleandSIMcardareexcluded.
41
Confidential
Do not publish