User Manual

1. The Front LEDs show the orientation of the aircraft.

2. The Aircraft Status Indicators communicate the system status of the ight controller. Refer to the

table below for more information about the Aircraft Status Indicators.

he Front LEDs, and Aircraft Status Indicators can be turned off in the app for

unobtrusive drone operations.

Aircraft Status Indicator Description

Normal

Red, green, and yellow ashes Turning On and Self Diagnostic Testing

Slow green ashing P-mode with GNSS positioning*

×2 Two green ashes P-mode with camera sensing Systems*

Alternating green and blue

ashing

The RTK function is enabled and RTK data is

used.

Slow yellow ashing

Fast green ashing

A-mode (no GPS and camera sensing positioning)

Braking automatically after obstacle detected

Warning

Fast yellow ashing Remote Controller Signal Lost

Slow red ashing Low Battery Warning

Front LEDs Aircraft Status Indicators

In Attitude mode, the camera sensing System and some advanced features are disabled.

Therefore, the aircraft cannot position or auto-brake in this mode and is easily affected by its

surroundings, which may result in horizontal shifting. Use the remote controller to position the

aircraft.

Maneuvering the aircraft in Attitude mode can be difficult. DO NOT fly the aircraft too far away as

you might lose control and cause a potential hazard. Avoid flying in areas where GNSS signal is

weak, or in narrow and confined spaces. The aircraft will otherwise be forced to enter Attitude

mode, leading to potential flight hazards, please land it in a safe place as soon as possible.

Flight Status Indicator

The aircraft features Front LEDs, and Aircraft Status Indicators. The positions of these LEDs are

shown in the figure below:

Confidential

Do not publish