Installation Instructions
SkyBell Sync Mode
Once the batery is charged, your SkyBell will automaically enter
sync mode. While in sync mode, the LED Light Indicator will lash
red at a rate of once per second. This indicates your device is
ready to sync.
If your device falls out of sync mode, you can manually iniiate
sync mode by pressing and holding the Main Buton for 20
seconds.
The Syncing Process
1.
From the home screen in the app, tap the link that says “Add
Device” or “Add SkyBell”. Follow the screens that guide you
through the syncing process. You will need your SkyBell device
ID and Wi-Fi password.
If the setup is successful:
1.
You will see a screen asking you to name your SkyBell. Name
your SkyBell and coninue through the remaining screens;
or
2. The LED light will turn from a blinking red to a blinking green
or solid green. This means SkyBell is connecing to the server
and creaing your account.
Once your SkyBell setup process is complete, SkyBell
will automaically begin downloading the newest irmware.
Please wait 5 minutes before pressing the SkyBell buton.
You may see the LED light turn red, then turn of, then turn
green. This is normal.
15
16