Installation Instructions

Ater 5 minutes have passed, press the SkyBell buton to conirm

that your doorbell chime is working correctly and your phone is

receiving push noiicaions.

If the setup is unsuccessful:

Tap “Cancel” in the app or click “OK” to the pop-up message.

Restart the syncing process from the beginning and make sure

you accurately enter your Wi-Fi password.

2. Ater your third unsuccessful sync atempt, please contact

customer service for assistance.

In the app, your new SkyBell device will appear in the home

screen. You can tap that device to adjust its individual seings.

Red Light Ater Successful Sync

If the LED light is a solid red at any ime ater a successful sync,

this means the device does not have Wi-Fi connecion and/or

internet connecion. Please visit www.SkyBell.com/support

to troubleshoot.

LED LIGHT KEY

Red (Solid) = Device has power but no Wi-Fi or internet

connecion

Red (Blinking once per second) = Device is in syncing mode

Red (Blinking once every 5 seconds) = Device has direct power

and batery is charging

Green (Solid) = Device has power, Wi-Fi and server

connecion (normal)

Green (Blinking Slow) = Device has power and Wi-Fi but is not

connecing to server