Operation Manual

YOUR SKY
+
BOX
TV TO FIT YOUR LIFE 59
YOUR SKY
+
BOX
When your Sky
+
box was installed, all the connections were made between your Sky
+
box, TV and minidish. Follow this diagram for
an overview of the standard setup. The connections on your Sky
+
box may vary from the pictures shown. The model number, serial
number and electrical rating of your Sky
+
box are on a label on its base.
WARNING!
You must disconnect your Sky
+
box from the mains supply before you connect your Sky
+
box to (or disconnect it from) any other equipment. Terminals marked
with the hazard symbol are hazardous live and the external wiring connected to these terminals requires installation by an instructed person or the use of ready-
made leads or cords. With the exceptions of the mains and the telephone line, all the interconnections between the rear panel of your Sky
+
box and your other
equipment are safe, extra-low voltage circuits. However, you should always disconnect the box from the mains before connecting other devices.
SKY
+
BOX REAR PANEL
TV
TV scart cable
telephone line
TV scart
mains cable
minidish
dish
input 2
dish
input 1
to phone socket