Operation Manual

4
Choosing a recording to watch
Choose the starting point
All recordings are stored in your Planner.
1 Go to your Planner.
2 Highlight the recorded programme and press play or select.
The
Playback screen appears and you may need to enter your PIN.
3 Use the left/right arrow to choose your starting point:
Start — plays the recording from the beginning.
End — plays back the last 10 seconds of the recording. This is
handy if you want to check the whole programme was recorded.
Last Viewed — joins the recording where it was stopped last time
you watched it.
User Defined — lets you choose where you want it to start (for
example, press
2 to start playback two minutes into the recording).
Bookmark — starts playback from bookmarks you have set.
4 Press select or play when you’re ready to start the programme.
Managing your recordings
62