User's Manual

D, Double click the “ ” button to redial the last call. Short press “ ”
button to answer or hang up a cal, se or anticlockwise to adjust the volume when
talking.
E, In connected mode, if the speaker is no voice when playing music or could not
redial after double click the“ ” button, Please turn off the mobile phone
bluetooth function and re-turn it on, then find the connection records of “S42”,
manually connect the speaker and mobile phone again, when connection is
successful, please play music or dial again.
F，If the paring records in the mobile phone was cleared, then operate the speaker
according to 3.2.
3.4 How to use the device in Aux mode
A，Long press the “ ”, waiting for the device switch on.
B, Insert the audio cable, the device enter into aux mode, blue LED flashes every 3
seconds.
C, Pull out the Aux cable, the devide will enter into the bluetooth mode, if the
device has connection records before, then it will automatically connected to the last
connected mobile phone.
D, long press ” ” about 3 seconds, the device turn off.
Specification:
Bluetooth version: V4.1
dimension: 103.5*103.5*30MM
Built - in battery : 3.7V
Battery capacity
：
2200MAH
driver: 50mm
SNR: ≥80Db
Net weight : about 290g
Charging time
：
about 3 hrs
Charging voltage: 5V
RMS: RMS 5W/
≤
10% THD
Charging current : ≤1000MA
Output power:6.5W(MAX)
Working time
：
about 10hrs (at 50%V)
changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
S42_CSR8635_V002