User's Manual

Full charged: Orange LED goes out
Low battery capacity: Orange LED flashes
3. function description
3.1 Definition
A. Bluetooth pairing: the Bluetooth enabled mobile phone, computer, tablet and other devices
(Support HSP, A2DP, AVRCP etc. profile) pair with bluetooth speaker. The pass code is no need
when pairing with the device with V2.1 version or above.
B, Manually back into connection: when the Bluetooth function of a mobile phone or
computer is on (this mobile phone or computer had already connected with the master speaker
and still have connection records), power on the device and click the pairing connection records
of the mobile phone or computer to connect the master speaker.
3.2 How to pair one Bluetooth speaker first time.
A, Long press ” ”, blue LED flashes 4 times, the device is power, waiting for
about 20 seconds, when blue and red LED alternately flashes, speaker enter into
pairing mode. Or directly press for about 5 seconds, the device enter into
paring mode.
B，Turn on the mobile phone bluetooth function, and searching for “ S42”, then click
it for pairing, after several seconds when hearing the prompt tone, means paired
successfully, and it shows “S42” connected successully” on the moblile phone.
C，Turn on the music player software of your mobile phone, press MFB “ ”
button to play /pause music through the speake r.
Tips: You could use” ” “ ”， “ ” those buttons to change to the previous/next
song, play / pause the music.
S42_CSR8635_V002