User's Manual

Notes：
1. Pls test the TV with wired headphone or check the TV's audio settings (Select 3.5mm output ) to
make sure the devices connect in the right way and play audio from the TV.
2. Pls connect the TV and SPDIF TX port with fiber optic cable when select the Toslink connection
mode.
4. How to use as a Bluetooth Receiver (RX)
4.1 Bluetooth pairing and connection
A. Under power off mode, switch to RX side and long press MFB for 3 seconds to power
on (Or power on then switch RX side).
B. Short press pair button to enter pairing mode with RX LED fast flash if doesn’t enter
when power on.
C. Place I2 and your phone (pc, tablet) close, turn on the bluetooth function of the
phone and connect “Boltune I2”.
D. TX and “A” LED turn on after connected, the speaker can be played music from phone
(PC or tablet) with 3.5mm audio cable or fiber optic cable.