Owner manual

21
3. Press ENTER to bring up the letter choices on the top line of the display. Use the directional buttons to select the letter you want
and press ENTER. Press ENTERagaintoselectthesecondletter.Continueuntilyouhavenished.Youcanpressthescroll
buttons to change the case of the letters to choose from or select numbers or special characters. When you are done entering the
 name,pressSETUP.
The display will now show a list of parameters that you can change for your camera
  o FieldofView(Horizontal)
  o FieldofView(Vertical)
  o ModeofMounting(PortraitorLandscape)
  o ExposureTime
Usethescrollkeystocyclethroughthislist.Tochangeanyoneoftheparameters,simplypressENTER to edit. Use the scroll keys or
the numeric keypad to make the appropriate changes and press ENTER
toaccept.Whenyouaredonewithallofthechanges,pressESC.
4. Thehandcontrolwillaskifyouwishtosaveyourchanges.Press1tosave.
Slew to Home
Theslewtohomefunctiontellsthetelescopetoslewbacktoitshomeposition(orthezeropositionofbothencoders).Bypressing
ENTER,themountwillmovetothisposition.
Video Coursing
ThevideocoursingfeatureallowsyoutousetheAllViewtakeavideoclipwithaconstantslewingspeedfromonepointtoanother.
Theuserdoesnotneedtocalculatethespeedineitheraxisofthemount.Instead,youspecifythestartingandendingpointsandthe
amount of time you wish to take to slew between the two.
1. FromthePanoramicFunctionmenu,usethescrollbuttonstoselectVideoCoursingandpressENTER.
2. UsethedirectionalkeystoslewthevideocameratothepointwhereyouwantyourpanningshottostartandpressENTER.
3. UsethedirectionalkeystoslewthevideocameratothepointwhereyouwantyourpanningshottoendandpressENTER.
 slewatthemount’smaximumspeed.Usethenumerickeypadtoenterthedurationinhours,minutesandseconds.PressENTER.
 Themaximumtimeyoucanenteris9hours,59minutes,and59seconds.
5. The hand control will ask if you are ready to start the coursing. Press 1tostartandthemountwillautomaticallymovetothe
 startingpositionandwillthenstartthevideocoursing.
Note: When the mount starts the coursing, the mount’s shutter release cable outlet will short to ground until the course has been
completed. You may use this useful signal to activate your camera or camcorder. Please refer to the documentation that came with your
camera or camcorder for information on utilizing this signal.
6. Oncetheslewhasbeencompleted,thehandcontrolwillaskifyouwishtoruntheslewagain.Press1 to continue or 2 to exit
Video Coursing and return to the Panoramic Function menu.