Owner manual
17
9. The hand control will display “Step 4 Set Shooting” and “Set Time Halt.”Usingthenumerickeypad,enterthenumberofseconds
you would like to halt the mount between shots and press ENTER.
10. The hand control will ask if you want to continue with Auto Shooting.
• Bypressingthe1key,AllViewwillworkinauto-shootingmode,whichwillsendsignalsviatheelectronicshutterreleasecable
to the camera to automatically release the shutter for each shot in the panorama. The mount will slew to its proper picturing
position,taketheimageandmovetothenextpicturepointwithoutanyinterventionfromtheuser.Thisauto-shootingfunction
isespeciallysuitableforCanonEOSDSLRcamerasusingtheshutterreleasecable(included).Afterselectingtheauto-shooting
function,thehandcontrolwillpromptyoutosetexposurecontroltime.Usethenumerickeystoinputtheappropriate
time setting. This can be between 0.1 seconds to 999.9 seconds.
Note: The mount’s exposure time does not refer to the camera’s exact shutter speed. This refers to the timing of the ON and OFF shutter
release signal sent from the mount to the camera. Usually the exposure time setting of this snap signal should be longer than the exposure
time setting on the camera. The actual shutter speed and aperture adjustments should be made on the camera itself. The mount does not
control this.
• Bypressingthe2key,youwillbeshootingtheexposuresmanually.Themountwillpromptyoutostartthealignment.When
youdo,themountwillslewtotherstpictureposition.ThedisplaywillbesimilartothatinFig. 33,whichdisplay’sPicture
Position1of33.Youwouldthentakethepictureusingthecamera’sshutterreleasebutton.Press3 on the hand control to slew to
thenextpicturepositionandmanuallytaketheimage.Continuethisprocessuntilallimageshavebeentaken.Atanytime,if
youwanttogobackandreshootanyofthepicturepoints,youcanpress1togothroughthepointsinreverse.
11. AftertheAllViewmountgoestothelastpicturepointandtakesapicture,thehandcontrolwillaskifyouwanttorepeatthe
panoramausingthesamepicturepoints.IfyouselectYes ,themountwillaskifyouwanttoshoottheimagesinthereverse
direction.IfyouchooseYes ,themountwilltakethesameimagesasbefore,butstartingattheendingpointandworkingthrough
themtotherstpoint.IfyouchooseNo,themountwillslewbacktotherstphotopointandwillrunthroughthepositionsinthe
correct order.
12. IfyouwishtoescapeEasyPanoMode,youmaypressESCwhenthemountstopsmoving.Youwillbeaskedifyouwishtoabort
Pano Made. Press 1 to return to the main menu.
Fig. 33