Owner manual

10
(reector)
(refractor and Maksutov)
INSERTING EYEPIECE (Fig.27)
1) Loosen the thumbscrew on the end of
the focus tube.
2) Insert the diagonal into the focus tube
and re-tighten the thumbscrew to hold
the diagonal in place.
3) Loosen the thumbscrews on the diagonal.
4) Insert the desired eyepiece into diagonal
and secure by re-tightening thumbscrews.
INSERTING EYEPIECE (Fig.26)
1) Unscrew the thumbscrews on the
end of the focus tube to remove the
black plastic end-cap.
2) Insert the desired eyepiece
then re-tighten thumb
screws to hold the
eyepiece in place.
EYEPIECE ASSEMBLY
Fig.26
Fig.27
Fig.25
RED DOT FINDER ASSEMBLY
ATTACHING THE RED DOT FINDER (Fig.25)
Slide the red dot nder bracket into the rectangular slot
and tighten the screw to hold the red dot nder in
place.