User Manual

• Unscrew Battery Cover using a Phillips head screwdriver (not included).
• Install 2 new “AA” (LR06) 1.5V alkaline batteries in the orientation shown.
• Replace Battery Cover and tighten screws to close.
Battery InstallationBattery Installation
ALKALINE BATTERY CAUTIONS
• Do not use rechargeable batteries.
• Non-rechargeable batteries are not to be recharged.
• Different types of batteries or new and old batteries are not to be mixed.
• Batteries are to be inserted using correct polarity.
• Remove exhausted batteries as soon as possible and discard properly.
• Remove all batteries from compartment if toy is not used for a long period.
• The supply terminals are not to be short-circuited.
• Never throw batteries in a fire or attempt to open the outer casing.
WARNING:Batteries are harmful if swallowed. Please keep away from children.
Battery Disposal: Dispose of batteries according to the local laws and regulations of your region. Some
batteries may be recycled, and may be accepted for disposal at your local recycling center. If you are not able to
identify the applicable rules in your area, please check the instructions of the battery manufacturer.
REQUIRES 2X
(not included)
AA (LR06) 1.5V