User's Manual

11 12
Plug USB Cable into the back of the camera
and loop the cable around the rings; continue
looping the cable if necessary.
Mount the camera to the back plate and align
the white dot to the left of the screw at the
tail of the white arrow and rotate camera
counter-clockwise to lock.
Manage the cable with optional Conduit.
1) Attach the Back Plate Cover to the back
plate if conduit is not used. 2) Attach conduit
then the Conduit Cover on top.
Tighten the security screw with hexagonal wrench.
Do not over-tighten the security screw.
Press lens down with fingers to turn the lens to
desired position.
Attach Visor to the top of the camera lens.Position camera and use Cable Clips to man-
age the cable if necessary.
1
4
2 5 6
73
4. Toucan Installation
STEP 3 Camera body installation
LO
C
K
Back Plate
Cover
Conduit
Cover