Toucan Surveillance Kit 2.
Table of Contents 1. Key Features Toucan Camera 2.0 1. Key Features 2 2. What is Included 5 3. Positioning 8 4. Toucan Installation 9 5. Status LED Indicators 13 6. Specifications 14 7. Troubleshooting & FAQ 15 8. Regulations & Compliance 16 Prevent a Break In, before it happens.
1. Key Features Smart Socket Functions on the Kuna Light app Easy to install the smart socket Adapt to lamp fixture · Simply thread in E26 adapter between fixture and the bulb Free app to receive automatic notifications, view live video, and speak directly to those at your door. Events captured up to 2 hours and stored in Cloud Server.
2. What is Included Before installing Toucan, make sure all parts are present. If any part is missing, please contact VuPoint Solutions at support@vupointsolutions.com. Camera Products Toucan Camera 2.0 · Mount camera under light fixture Smart Socket · Thread in between light fixture and light bulb. USB port provides power to camera. Accessory - Step 1 Accessory - Step 2 USB cable with Silicon sleeve · Connect camera to socket for power source.
2. What is Included 3. Positioning Manual and Labels Smart Socket is compatible with standard A15 and A19 light bulbs. If your lamp sconce height is less than 7 inches, or if your light bulb protrudes from your light fixture after threading in Smart Socket and light bulb, please consider changing to a smaller light bulb.
4. Toucan Installation Before installation, make sure the power switch is OFF or disconnect power at the fuse. Refer to “What Is Included” in Section 2 for part installation for the steps below: STEP 1 Socket installation 1 2 3 Step 2 Mounting the camera’s back plate Lens mark for camera positioning and leveler to align and balance back plate. You can use Positioning Sticker (included) to mark placement before adhering to your wall.
4. Toucan Installation Step 3 Camera body installation 1 2 5 6 LOCK Plug USB Cable into the back of the camera and loop the cable around the rings; continue looping the cable if necessary. 3 4 Back Plate Cover Tighten the security screw with hexagonal wrench. Do not over-tighten the security screw. Press lens down with fingers to turn the lens to desired position. 7 Conduit Cover Manage the cable with optional Conduit. 1) Attach the Back Plate Cover to the back plate if conduit is not used.
5. Status LED Indicators 6. Specifications In order to set up your Toucan, please make sure it’s successfully installed, and the status LED on the bottom left side of your Toucan camera is flashing red. This means that your Toucan is ready to be set up! Toucan Camera (Model: TC200KU) Camera FHD 1080p resolution Video resolution 1920x1080 at 30 fps. H.264 LED status Description Field of View 160 degrees (diagonal) Wi-Fi® 2.4GHz & 5GHz 802.
7. Troubleshooting & FAQ Note: Model Number and Serial Number (S/N) is located on the packaging, instruction manual, or on the product. Please have this information ready before contacting tech support. Frequently Asked Questions 8. Regulations & Compliance Safety & Operations IMPORTANT SAFETY INSTRUCTIONS 1 How long will my recordings be available? All Toucan units come standard with a two-hour download and “look back” window.
8. Regulations & Compliance FCC Statement (ii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 52505350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit; (iii) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.
www.toucan.
