User Manual

8
7


The wiard will calibrate the ESC end points. Tick the 3 boxes as showing
above and make sure to follow the instrucon steps.
Click Next to calibrate on ESC output
On the ESC menu we have Standard ESC, Rapid ESC and OneShot ESC.
ANAKIN  ARF is equipped with with OneShot ESCs, if you are using
PPM, SBS or DSM receiver the OneShot ESC will be acve in blue rather
than grey out, choose OneShot ESC and click Next.
Now the basic conguraon has completed, review the sengs and click
Next. Now you will proceed with the sensors calibraon for the CC3D.
Put the ANAKIN  FP on a at surface, click Calculate buon to start
the calibraon, and click Next when done.
Click Next to calibrate on ESC output
Select Mulrotor and click Next
Keep the default uadcopter , click Next to setup ESC