Install Instructions

13
How To Install the
Programmable Automatic Flushing Timer
The Humidier Automatic Flushing Timer
automatically ushes accumulated min-
eral deposits from all central-system
steam– and reservoir-type humidiers.
This enables homeowners to enjoy the
benets of healthful, humidied air with-
out the hassles of frequent maintenance
due to mineral buildup.
The ushing timer is set at the factory to
ush the humidier every two hours for a
duration of 10 seconds, using only about
1.5 gallons of water per day. (See “Re-
programming Instructions”, page 15, for
alternate settings.) This ushing reduces or eliminates servicing during the hu-
midication season, depending on the mineral content of the water.
To Install the Flushing Timer on a Steam Humidier:
Figure 8—Installation of a Pro-
grammable Automatic Flushing
Timer on a Steam Humidier
CAUTION: All plumbing
and electrical connections
must comply with relevant
codes and ordinances.