Install Instructions

Adjust the water level. (See Nos. 7 & 8 in “Plumbing and Setting the Water 5.

Level”, pgs. 11 & 12.)

Slide the anges of the humidier reservoir into the mounting bracket.6.

Secure the humidier to the duct with the screws provided. 7.

Option C requires duct reinforcement

to hold the humidier securely in place.

DANGER: Wear safety glasses when

cutting or drilling. Do not cut or drill into

any air conditioning components or electri-

cal enclosures during installation. Electro-

cution is possible if you come in contact

with a live electrical wire; blindness can

occur if refrigerant contacts your eyes.

To install (Option C:)

Place the mounting bracket (provided) 1.

at the selected location on the bottom

of the duct.

Use a marker to trace around the inside 2.

of the mounting bracket. Cut out the

duct opening.

CAUTION: DO NOT attach the mount-

ing bracket before the hole in the duct-

work has been cut.

Attach the mounting bracket to the ductwork with sheet metal screws. 3.

Adjust the water level. (See Nos. 7 & 8 in “Plumbing and Setting the Water 4.

Level”, pgs. 11 & 12.)

Slide the anges of the humidier reservoir into the mounting bracket. 5.

Secure the humidier to the duct with the screws provided. 6.

NOTE: See separate wiring instruction manual, “Wiring Instructions for High-

Capacity Steam Humidiers”.

Figure 5—Option C:

Duct Center Mount

Figure 6—Mounting Bracket