User Guide

5. Adjust the water level. (See Nos. 7 & 8 in “Plumbing and Setting the Water

Level”, pgs. 11 & 12.)

6. Slide the flanges of the humidifier reservoir into the mounting bracket.

7. Secure the humidifier to the duct with the screws provided.

Option C requires duct reinforcement

to hold the humidifier securely in place.

DANGER

: Wear safety glasses when

cutting or drilling. Do not cut or drill into

any air conditioning components or electri-

cal enclosures during installation. Electro-

cution is possible if you come in con-

tact with a live electrical wire; blind-

ness can occur if refrigerant contacts

your eyes.

To install (Option C:)

1. Place the mounting bracket (provided)

at the selected location on the bottom

of the duct.

2. Use a marker to trace around the in-

side of the mounting bracket. Cut out

the duct opening.

CAUTION

: DO NOT attach the

mounting bracket before the hole in the

ductwork has been cut.

3. Attach the mounting bracket to the ductwork with sheet metal screws.

4. Adjust the water level. (See Nos. 7 & 8 in “Plumbing and Setting the Water

Level”, pgs. 11 & 12.)

5. Slide the flanges of the humidifier reservoir into the mounting bracket.

6. Secure the humidifier to the duct with the screws provided.

NOTE

: See separate wiring instruction manual, “Wiring Instructions for High-

Capacity Steam Humidifiers”.

Figure 5—Option C:

Duct Center Mount

Figure 6—Mounting Bracket