User's Manual


76JadeOSUserManual
(JadeOS) #copy ftp 1.2.3.4 user cert_file flash sc-file-1
(JadeOS) #Cert import pem serverCert sc-1 sc-file-1
10.6 Special SSID and SSID Control
In EDU mode, in order to avoid AP disables all the SSIDs when AP disconnects with
AC, AC will specify a special SSID when AP connects with AC; when CAPWAP is
disconnected, AP will enable this SSID to ensure the normal service. The configuring
command is as follows:
(JadeOS) (config)#wlan ssid-profile SSID
(JadeOS) (SSID Profile "SSID")#special-ssid
Timing Shutdown
Timing shutdown supports the following functions:
¾ Support AC timing shutdown the function of radio frequency in specified AP
¾ Support AC timing shutdown the specified functions of SSID
The configuring command：
time-range default
Example：
(JadeOS) (config)#time-range-profile default
(JadeOS) (Time Range Profile "default")#range weekday 17:00 18:00
(JadeOS) (Time Range Profile "default")#range weekend 17:00 18:00
(JadeOS) (Time Range Profile "default")#range daily 17:00 18:00
(JadeOS) (Time Range Profile "default")#exit
(JadeOS) (config)#wlan vap default
(JadeOS) (Virtual AP Profile "default")#time-range default
(JadeOS) (Virtual AP Profile "default")#exit
(JadeOS) (config)#radio dot11a-profile default
(JadeOS) (802.11a radio Profile "default")#time-range default
(JadeOS) (802.11a radio Profile "default")#exit
Note: Shutdown the frequency will make the whole radio disable; shutdown SSID just disable one
SSID in radio.
10.7 ACL
User access is mainly to issue ACL based on SSID, MAC, flow threshold, bandwidth
control. ACL is important in building secure network, and mainly supports the fol-
lowing functions:
¾ ACL based on MAC address
Configure ACL based on MAC address in AC, which achieve the black-list and